Accelerator Pedal Switch: Service and Repair

Accelerator Pedal:

REMOVAL





1. Remove the bushing and inner cable of the accelerator arm side.





2. After disconnecting the accelerator switch connector, loosen the bolts of the accelerator arm bracket and remove.

INSTALLATION




1. When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.




2. Apply sealant to the bolt mounting hole, and tighten the accelerator arm bracket.
Tightening torque
Accelerator arm bracket bolts:
8 - 12 Nm (80 - 120 kg.cm, 5.8 - 7.2 lb.ft)




3. Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.

4. Apply multipurpose grease around the cable end.