Seat Back Cover Replacement
SEAT BACK COVER REPLACEMENT1. Remove the headrest.
2. Remove the armrest.
3. Remove the back folding hinge cover (A).
4. After loosening the mounting bolts.remove the cushion (B).
5. After folding the seat back,remove the shopping hook (A) from the back panel.
6. Remove the back panel (A).
7. Remove the recliner lever cover (A).
8. Remove the hogring clip (A) and headrest guide (B), then remove the seat back assembly (C).
9. Remove the hogring clip (A) of the pad.
10. Disconnect the aplix (A) on the front of seat back, remove the back cover (B).
11. Installation is the reverse of removal.
NOTE: To prevent wrinkles, make sure the material is stretched evenly over the cover before securing the aplix