Initial Inspection and Diagnostic Overview

TESTING
1. Wait until engine is cool, then carefully remove the radiator cap and fill the radiator with engine coolant, then install it on the pressure tester.
2. Apply a pressure tester to the radiator and apply a pressure of 93 - 123 kPa (0.95 - 1.25 kgf-cm2, 14 18 psi).
3. Inspect for engine coolant leaks and a drop in pres sure.
4. Remove the tester and reinstall the radiator cap

NOTE: Check for engine oil in the coolant and/or coolant in the engine oil.