Fluid - M/T: Service and Repair
REPLACEMENT OF TRANSAXLE GEAR OIL1. With the vehicle parked on a level surface, remove the drain plug and drain the transaxle oil.
2. Replace the gasket with a new one and install the drain plug.
TORQUE: 30 - 35 Nm (300 - 350 kgf-cm, 21.7 - 25.3 ft. lbs.)
3. Add new oil through the filler plug and, fill it to just below the plug opening.
TORQUE: 35 - 45 Nm (350 - 450 kgf-cm, 25.3 - 32.5 ft. lbs.)
Standard value
Transaxle oil total capacity 2.1 lit (2.2 U.S.qts., 1.8 Imp.qts)