Curtain Airbag Replacement
CURTAIN AIRBAG REPLACEMENTREMOVAL
1. Disconnect the battery negative cable and wait of least 30 second before beginning work.
2. Remove the follows parts.
- Front and rear seat
- Interior side trim
- Trunk trim
- Headlining
3. Disconnect the connector (A).
4. After loosening the mounting bolts, remove the curtain airbag (B).
5. Installation is the reverse of removal
NOTE: After installing the curtain airbag, confirm proper system operation: Turn the ignition switch ON; the SRS indicator light should blink for about 6 seconds and then go off.