4WD

REAR SUSPENSION ARM





COMPONENTS

REPLACEMENT

[4WD]





1. Remove the muffler (A).





2. Remove the suspension arm mounting bolts (A).
3. Remove the opposite side suspension mounting bolts.





4. Remove the coupling control connector (A).





5. After supporting the rear cross member assembly (B) with a jack (A), remove the cross member mounting bolts and nuts (C).
6. Remove the propeller shaft.





7. Remove the rear differential (A) from the crossmember (B).





8. Remove the suspension arm bracket mounting bolts (A).
9. Remove the suspension arm (B).





10. Install the suspension arm bracket mounting bolts (A).





11. Install the rear differential (A) on the crossmember (B).
12. Install the propeller shaft.





13. After supporting the rear crossmember assembly (B) with the jack (A), install the crossmember mounting bolts and nuts (C).





14. Install the coupling control connector (A).





15. Rear suspension arm-to-rear carrier bolts (A) should be temporarily tightened, and then fully tightened with the vehicle on the ground in unloaded condition.