Installation

FRONT STABILIZER BAR





COMPONENTS

INSTALLATION





1. Install the bushing (B) on the stabilizer bar (A).

NOTE: Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).

2. Install the bracket on the bushing (B).
3. After tightening the bolts of the bushing bracket temporarily, install the bushing bracket on the opposite side.
Tightening torque 50 - 65 Nm (500 - 650 kgf-cm, 36.9 - 48.0 ft. lbs.)
4. Install the rear mounting bolts of sub-frame.





5. Install the nut (B) on the stabilizer bar link (A).





6. Install the front wheel and tire (A) on the front hub (B).

CAUTION: Be careful not to damage the hub bolts (C) when installing the front wheel and tire (A).