Installation

REAR STABILIZER BAR





COMPONENTS

INSTALLATION





1. Install the bushing (B) on the stabilizer bar (A).

NOTE: Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).





2. Install the stabilizer bracket (B) and then install the stabilizer bar mounting bolts (A).
3. One side bracket should be temporarily tightened, and then install the bushing on the opposite side.
Tightening torque 50 - 65 Nm (500 - 650 kgf-cm, 36.9 - 48.0 ft. lbs.)





4. Install the stabilizer bar link mounting nut (A).
5. Employ the same manner described above step 3 and 4 to the other side.





6. Install the rear wheel and tire (A) on the rear hub (B).

CAUTION: Be careful not to damage the hub bolts (C) when installing the rear wheel and tire (A).