Displaying & Reading Trouble Codes
HOW TO USE SCAN TOOLINSTRUCTION
With the advent of electronic control vehicles, the system efficiency increases with the complexities, as you would realize.
As medical diagnostic devices do, the advanced testers can help identify and fix the problems.
The scan tool can provide you with the versatile and user friendly monitoring capabilities.
SCAN TOOL FUNCTION
Scan tool offers the following functionality:
Diagnostic trouble codes
Freeze frame data
Current data
Actuation test
HOW TO CONNECT
For vehicles with 16 pin Data Link Connector (DLC), power is supplied from the DLC terminal through the DLC CABLE without the need for an additional power supply.
For connections between the Hi-scan and these vehicle data link terminals the DLC CABLE 16 is all that is required.
HOW TO SELECT VEHICLE AND SYSTEM OPERATION FLOW
1. Select "HYUNDAI VEHICLE DIAGNOSIS"
2. Select "VEHICLE NAME"
3. Select "AUTOMATIC TRANSAXLE SYSTEM"
BASIC APPLICATION
Having connected and turned on scan tool, the vehicle and system selection must be made from the 1.0 HYUNDAI VEHICLE DIAGNOSIS SCREEN.
The support functions vary according to vehicles. Therefore, the correct selection must be made.
Selection may be made by scrolling up or down the screen and pressing ENTER, or by using the numeric keypad to select the appropriate option number and pressing ENTER.
HOW TO READ DTC
OPERATION FLOW
1. Select vehicle and system
(Refer to How to select vehicle and system)
2. Select 1.1 DIAGNOSTIC TROUBLE CODES
MODE APPLICATION
At this level, Diagnostic trouble codes (DTC) are displayed for the selected TCM.
HOW TO ERASE DTC
OPERATION FLOW
1. Select "1.1 DIAGNOSTIC TROUBLE CODES"
(Refer to How to read DTC)
2. Select "ERAS" key on the Diagnostic Trouble codes mode.
3. Select 1.2.2 "ERASE FAULT CODE"
MODE APPLICATION
"ERAS"
This soft function key will clear the DTC: currently held in the memory of the selected TCM.
If this option is selected, a message requesting confirmation of the ERAS request will be displayed.
The YES or NO key should be used to confirm or cancel the request to clear the current DTC.