Front

REMOVAL




1. Detach the wiper cap, then remove the windshield wiper arm and blade after removing a nut(A).

Tightening torque
28 - 33 N.m (280 - 330 kgf.cm, 20.2 - 23.8 lbf.ft)




2. Remove the weatherstrip then remove the cowl top cover(A) after removing 3 screws(B).




3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts.
Disconnect the wiper motor connector(A) and windshield deicer connector(B) from the wiper motor & linkage assembly.

Tightening torque
7 - 11 N.m (70 - 110 kgf.cm, 5.1 - 8.0 lbf.ft)

4. Installation is the reverse of removal.

INSTALLATION







1. Install the wiper arm and blade to the specified position.




2. Set the washer nozzle on the specified spray position.