Rear

REMOVAL




1. Detach the wiper cap(A), then remove the rear wiper arm after removing a nut(B).

Tightening torque
Nut(B): 14 - 17 N.m (140 - 170 kgf.cm, 10.1 - 12.3 lbf.ft)




2. Remove the handle(B) after removing a nut(A).

Tightening torque
Nut(A): 10 - 13 N.m (100 - 130 kgf.cm, 7.2 - 9.4 lbf.ft)

3. Open the tailgate glass then remove the rear wiper motor cover(A).




4. Disconnect the rear wiper motor connector then remove the rear wiper motor(B) after removing 3 nuts.

Tightening torque
Nut: 14 - 17 N.m (140 - 170 kgf.cm, 10.1 - 12.3 lbf.ft)

5. Installation is the reverse of removal.

INSTALLATION







1. Install the rear wiper arm and blade to the specified position.




2. Set the rear washer nozzle on the specified spray position.