General Fluid Specifications

WARNING:
Always use Genuine Hyundai parts and recommended fluid.
Using any other type of parts and fluid can cause serious damaged of the vehicle. RECOMMENDED LUBRICANTS

SELECTION OF ENGINE OIL

Recommended API classification : SH OR ABOVE




RECOMMENDED SAE VISCOSITY GRADES

NOTE:
For best performance and maximum protection of all types of operation, select only those lubricants which

1. Satisfy the requirements of the API classification.
2. Have the proper SAE grade number for expected ambient temperature range.

Lubricants which do not have both an SAE grade number and an API service classification on the container should not be used.

Always be sure to cover fenders, seats, and floor areas before starting work.

CAUTION:
The support rod must be inserted into the hole near the edge of the hood whenever you inspect the engine compartment to prevent the hood from falling and causing possible injury.
Make sure that the support rod has been released prior to closing the hood. Always check to be sure the hood is firmly latched before driving the vehicle.