Overhaul

DISASSEMBLY AND REASSEMBLY

KEY LOCK ASSEMBLY
1. If it is necessary to remove the key lock assembly (A), use a punch to make a groove on the head of the special bolt (B), and then use a screwdriver to remove the key lock assembly mounting bracket (C).





2. Disassemble the key lock assembly (A) from the steering column and shaft assembly (B).





3. Reassembly is reverse of disassembly.

UNIVERSAL JOINT ASSEMBLY
1. Remove the bolt (A) connecting the universal joint assembly (B) and the steering column and shaft assembly (C).





2. Remove the universal joint assembly (A) from the steering column and shaft assembly (B).





3. Reassembly is reverse of disassembly.

INSPECTION

1. Check the steering column shaft for damage and deformation.
2. Check connections for play, damage and smooth operation.
3. Check the ball joint bearing for wear and damage.