Front

FRONT WIPER MOTOR

INSTALLATION







1. Install the wiper arm and blade to the specified position.




2. Set the washer nozzle on the specified spray position.

REMOVAL




1. Remove the windshield wiper arm and blade after removing a nut.

TORQUE : 28 - 32 Nm (2.8 - 3.2 kgf.m, 20 - 23.1 lbf.ft)




2. Remove the weather strip (A) then remove the cowl top cover (B) after removing 6 clips (C).




3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts. Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly.

TORQUE : 7 - 11 Nm (0.7 - 1.1, kgf.m, 5.1 - 8.1 lbf.ft)

4. Installation is the reverse of removal.