Antitheft - Key Cutting/Immobilizer Programming: Overview

Group: ELECTRICAL

Number: 06-90-021

Date: OCTOBER, 2006

Model:
AZERA

Subject:
AZERA - KEY CUTTING PROCEDURE AND IMMOBILIZER PROGRAMMING - UPDATED

This TSB supercedes bulletin 05-90-012.

1. - AZERA KEY CUTTING PROCEDURE

The Azera is equipped with high security internally cut keys. This section of the TSB provides information on how to order complete pre-cut key sets from an HMA Parts Distribution Center.

These special high security key blanks cannot be cut by conventional key cutting machines and must be either ordered pre-cut from your Hyundai Motor America Parts Distribution Center or be cut on a specific key cutting machine.





Azera key blanks can only be code cut by the BD Laser, a machine produced by Barnes Distribution. This machine may not be available at all Hyundai Dealerships, therefore the option to order them pre-cut from an HMA PDC has been made available.