Crankshaft Main Bearing

Crankshaft
Standard end play 0.10-0.28mm (0.0039-0.0110in.)
Main journal diameter 68.942-68.960mm (2.7142 2.7149in.)
Crank pin diameter 54.954-54.972mm (2.1635 2.1642in.)
Standard oil clearance 0.022-0.040mm (0.0009-0.0016in.)

DISCRIMINATION OF CRANKSHAFT:

Main bearing cap inner bolt(M11) 49.00 Nm (5.0 kgf.m, 36.16 lb-ft) + 90 degrees
Main bearing Gap outer bolt(M8) 19.60 Nm (2.0 kgf.m, 14.46 lb-ft) + 120 degrees
Main bearing cap side bolt(M8) 29.40-31.36 Nm (3.0-3.2 kgf.m, 21.70-23.14 ft. lbs.)