Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Speed Sensor

INPUT SPEED SENSOR

INSTALLATION
1. Install the new O-ring to the input shaft speed sensor.
2. Install the input shaft speed sensor.
TORQUE: 10-12 Nm (1.0-1.2 kgf.m, 7-8 lb-ft)

CAUTION: While Installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.

3. Check the connector for dust, dirt, or oil, and then connect the connector securely.
4. Installation is the reverse of removal.