Shift Linkage: Service and Repair

AUTOMATIC TRANSAXLE CONTROL SYSTEM

SHIFT LEVER

REMOVAL





1. Remove the shift lever knob (A).





2. Remove the console cover (B), disconnecting the shift lever connector (A).





3. Separate the lever assembly (B) from the facia bracket assembly (A).
4. Disconnect the cable interlinked to lever assembly.





5. In case of 4WD vehicle, disconnect the 4WD ECM connector (A).
6. Remove the facia bracket assembly.

INSTALLATION
1. Install the facia bracket assembly.





2. In case of 4WD vehicle, connect the 4WD ECM connector (A).
3. Connect the cable interlinked to lever assembly





4. Install the lever assembly (B) to the facia bracket assembly (A).
5. Install the console cover (B) fixing the shift lever connector (A) on it.





6. Install the lever cover (B) completely connecting the terminals.





7. Install the shift lever knob (A).