Rear Door Window Glass: Service and Repair

GLASS AND QUARTER GLASS REPLACEMENT

NOTE: Put in gloves to protect your hands.

1. Remove the door trim.
2. After disconnecting the glass run (A) and weatherstrip (B), then remove the delta molding (C).






3. Carefully move the glass (A) until you can see the bolts, then loosen them.Carefully pull the glass out through the window slot (B).

CAUTION: Take care not to drop the glass and scratch the glass surface.






4. Installation is the reverse of removal.
- Roll the glass up and down to see if it moves freely without binding.
- Make sure that there is no clearance between the glass and glass run channel when the glass is closed.
- Adjust the position of the glass as necessary.