Starter Relay: Testing and Inspection
STARTER RELAYINSPECTION
1. Remove the fuse box cover.
2. Remove the starter relay(A).
3. Inspect the relay continuity.
- Using an ohmmeter, check that there is continuity between terminals 2 and 4.
If there is no continuity, replace the relay.
- Check that there is no continuity between terminals 1 and 5.
If there is continuity, replace the relay.
4. Inspect the relay operation.
- Apply battery positive voltage across terminals 2 and 4.
- Using an ohmmeter, check that there is continuity between terminals 1 and 5.
If there is no continuity, replace the relay.
5. Install the starter relay.
6. Install the fuse box cover.