Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Wiper Motor

FRONT WIPER MOTOR

REMOVAL




1. Detach the wiper cap, then remove the windshield wiper arm and blade after removing a nut(A).

Tightening torque : 28-33 Nm (280-330 kgf.cm, 20.2-23.8 lbf-ft)




2. Remove the weatherstrip then remove the cowl top cover(A) after removing 3 screws(B).




3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts.
Disconnect the wiper motor connector(A) and windshield deicer connector(B) from the wiper motor & linkage assembly.

Tightening torque : 7-11 Nm (70-110 kgf.cm, 5.1-8.0 lbf.ft)

4. Installation is the reverse of removal.

INSTALLATION




1. Install the wiper arm and blade to the specified position.




2. Set the washer nozzle on the specified spray position.