Even After the Engine Is Started, the ABS Warning Lamp Remains on

Even After The Engine Is Started, The ABS Warning Lamp Remains ON.

DETECTING CONDITION





INSPECTION PROCEDURES

CHECK DTC OUTPUT.
1. Connect the Hi-Scan (pro) to the 16P data link connector located behind the driver's side kick panel.
2. Check the DTC output using Hi-Scan (pro).
Is DTC output?

NO
> Repair circuit indicated by code output.

YES
> Check instrument cluster.

CHECK INSTRUMENT CLUSTER
Disconnect the cluster connector and turn the ignition switch ON.
Does the ABS warning lamp remains ON?

YES
> Replace the instrument cluster.

NO
> Check for open the wire.

CHECK FOR OPEN IN THE WIRE
Check for continuity in the wire between cluster and ABS control module.
Is there continuity?

YES
> Replace the ABS control module and recheck.

NO
> Repair an open in the wire between cluster and ABS control module.