Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2008 >> Azera V6-3.3L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Air Bag Control Module: Service and Repair

SUPPLEMENTAL RESTRAINTS SYSTEM CONTROL MODULE (SRSCM)

REMOVAL
1. Disconnect the battery negative cable and wait for at least three minutes before begining work.
2. Remove the ignition key from the vehicle.
3. Disconnect the DAB, PAB, SAB, CAB, BPT and BUPT connectors.
4. Remove the floor console and heater ducts.
5. Disconnect the SRSCM harness connector (A) and (B) from the SRSCM.






6. Remove the SRSCM mounting bolts (4EA) from the SRSCM, then remove the SRSCM.






INSTALLATION
1. Disconnect the battery negative cable and wait for at least three minutes before begining work.
2. Remove the ignition key from the vehicle.
3. Install the SRSCM with the SRSCM mounting bolts.

Tightening torque (SRSCM Mounting Bolt) : 0.7 - 0.9 kgf.m (6.9 - 8.8 Nm, 5.1 - 6.5 lb.ft)

NOTE: Use new mounting bolts when replacing the SRSCM after a commission.

4. Connect the SRSCM harness connector.
5. Install the heater ducts and floor console.
6. Connect the DAB, PAB, SAB, CAB, BPT and BUPT connectors.
7. Reconnect the battery negative cable.
8. After installing the SRSCM, confirm proper system operation:
- Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
pro multis · About Operation CHARM