Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Programming and Relearning
SENSOR INITIATING PROCEDURE1. Read the four sensor's ids starting with sensor 1 (1 normally front left, 2 front right, 3 rear left, 4 rear right).
2. Connect 'TPMS exciter' to the diagnostic connector.
3. Register the four sensor's ids to the receiver.
4. Disconnect diagnostic link.
5. Cycle Ignition, wait 4 minutes and check that Normal Receiver State is now indicated.