Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Repairs and Inspections Required After a Collision: Service and Repair
COMPONENT REPLACEMENT AFTER DEPLOYMENTNOTE: Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.
When the seat belt pretensioner(s) deployed after a collision, replace the following items.
- Deployed seat belt pretensioner(s)
- SRSCM
- Front impact sensors
- SRS wiring harnesses
When the front airbag(s) deployed after a collision, replace the following items.
- SRSCM
- SRSCM Deployed airbag(s)
- Side impact sensor(s) for the deployed side(s)
- SRS wiring harnesses
After the vehicle is completely repaired, confirm the SRS airbag system is OK.
- Turn the ignition switch ON, the SRS indicator should come on for about 6 seconds and then go off.