C2320

DTC C2312 FL OUTLET VALVE MALFUNCTION
DTC C2320 FR OUTLET VALVE MALFUNCTION
DTC C2328 RL OUTLET VALVE MALFUNCTION
DTC C2336 RR OUTLET VALVE MALFUNCTION

COMPONENT LOCATION
Refer to DTC C1235. C1235

GENERAL DESCRIPTION
Refer to DTC C2308. C2308

DTC DESCRIPTION
Refer to DTC C2308. C2308

DTC DETECTING CONDITION
Refer to DTC C2308. C2308

MONITOR ACTUATION TEST
1. Connect scantool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scantool.
4. Inspect operating status of outlet valve with Actuation Test.





5. Does a inlet valve operate normally?

YES
> Fault is intermittent caused by inoperative valve or was repaired and HECU memory was not cleared. Go to the applicable troubleshooting procedure.

NO
> Go to "Component Inspection" procedure.

TERMINAL AND CONNECTOR INSPECTION
Refer to DTC C2308. C2308

VERIFICATION OF VEHICLE REPAIR
Refer to DTC C1101. C1101