Rear Wheel Alignment

REAR WHEEL ALIGNMENT

TOE-IN

Standard value: 4+3 -1 mm (0.16+0.12 -0.04in.)

NOTE:
^ Adjust the toe-in by turning the tie rod end of the rear suspension arm.

Left tie rod: Clockwise direction -> toe-in
Right tie rod: Clockwise direction -> toe-out
A variation of toe by a rotation of the tie rod: About 6mm (0.6°)

^ The cam bolt should be adjusted to a maximum of 90° left or right from the center position.

CAUTION: After adjusting the He rod, tighten both nuts to the specified torque.