C2112

DTC C2112 VALVE RELAY ERROR

DESCRIPTION
The HECU makes the valve relay OFF, when the ignition switch is turned ON, but ON during its initial check. The HECU checks the valve relay by checking the voltage of the valve power monitoring wire and comparing the signals from the valve relay. The HECU also checks continuity of the valve power monitoring wire.

DTC DESCRIPTION
This code shows in case that there is no continuity of the valve power monitoring wire.

DTC Detecting Condition:

FAIL-SAFE FUNCTION
The system stops. the ABS, TCS (ESC) and the EBD functions are inhibited. The ABS, TCS (ESC) and the EBD warning lamps are ON. The valve relay and all solenoids are OFF.