Rear Wiper Motor

REAR WIPER MOTOR

REMOVAL
1. Detach the wiper cap (A), then remove the rear wiper arm after removing a nut (B).






Tightening torque Nut(B): 14 - 17 Nm (140 - 170 kgf-cm, 10.1 - 12.3 lbf-ft)

2. Remove the handle (B) after removing a nut (A).






Tightening torque Nut (A): 10 - 13 Nm (100 - 130 kgf-cm, 7.2 - 9.4 lbf-ft)

3. Open the tailgate glass then remove the rear wiper motor cover (A).
4. Disconnect the rear wiper motor connector then remove the rear wiper motor (B) after removing 3 nuts.






Tightening torque Nut: 14 - 17 Nm (140 - 170 kgf-cm, 10.1 - 12.3 lbf-ft)

5. Installation is the reverse of removal.

INSTALLATION
1. Install the rear wiper arm and blade to the specified position.






- Specified position: The first deicer line from bottom of the rear window.






2. Set the rear washer nozzle on the specified spray position.