Steering - Power Steering Pump Replacement Part
GROUPSTEERING SYSTEM
DATE
NOVEMBER 2012
NUMBER
12-ST-002
MODEL(S)
CM SANTA FE 3.3L
SUBJECT:
POWER STEERING PUMP PARTS APPLICATION
Description:
This bulletin provides information regarding new replacement power steering pump assembly available for Santa Fe (GMA) vehicles equipped with Lambda-3.3L Multi Point Injection (MPI) V6 engine. Please refer to the parts information and the interchangeability described in this bulletin
Parts Information:
Warranty Information - Normal Warranty Applies:
Parts Update Chart:
IMPORTANT NOTES ON PARTS CHANGES:
1) Previous design power steering pump assembly and power steering hose assembly service parts have been discontinued.
2) Both previous and new design suction hoses are available as service parts.
3) Previous and new design power steering pump assemblies, power steering hose assemblies and suction hoses are not interchangeable.
4) If replacing either the previous design power steering pump assembly or power steering hose assembly with a new design part, the 3 previous design parts described in this bulletin must be simultaneously replaced with new design parts as a set.
a) Connect the pressure switch of the new design power steering pump assembly to the engine wiring connector where the pressure switch of previous design power steering hose assembly was connected.