Verification of Vehicle Repair

Airbag

Airbag Control Unit - B1484 2nd stage Driver airbag resistance circuit short to Battery - Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect scan tool and select "Diagnostic Trouble Codes (DTC)" mode
2. Using a scan tool, clear the DTC.
3. Operate the vehicle within DTC Enable conditions in General information.
4. Are any DTC present?
YES
1) Go to the applicable troubleshooting procedure.
NO
1) System is performing to specification at this time.