Verification of Vehicle Repair

TPMS

Tire Pressure Monitoring System - C1319 Sensor 3 Wrong Type Installed - Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect TPMS exciter or scantool and select "Diagnostic Trouble Code (DTC)" mode.
2. Using a TPMS exciter or scantool, Clear DTC.
3. Operate the vehicle within DTC Enable conditions in General information.
4. Are any DTC present?
YES
1) Go to the applicable troubleshooting procedure.
NO
1) System is performing to specification at this time.