Verification of Vehicle Repair

Transmission

Automatic Transaxle - P0755 Shift Control Solenoid Valve-B Circuit - Open or Short (GND) - Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.
1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
2. Using a scantool, Clear DTC.
3. Operate the vehicle within DTC Enable conditions in General information.
4. Are any DTCs present?
YES
1) Go to the applicable troubleshooting procedure.
NO
1) System performing to specification at this time.