Camshaft Bearing

Camshaft Bearing Cap

Install the camshaft bearing caps and the camshaft thrust bearing cap.










Tighten the bolts in order to below sequence.

Tightening torque :
1st step 6.9 - 7.8 N.m ( 0.7 - 0.8 kgf.m, 5.1 - 5.8 lb-ft)
2nd step 13.7 - 14.7 N.m (1.4 - 1.5 kgf.m, 10.1 - 10.8 lb-ft)










NOTE: Be careful the right, left bank, intake, exhaust side before assembling.