Transmission and Drivetrain: Technical Service Bulletins

• Recalls
  • Campaign TB8 - A/T Intermediate Shaft Noise
    • Overview
    • Section I: Service Procedure
    • Procedure # 2: Transaxle and/or Intermediate Shaft Worn
    • Procedure # 3. Repair Differential:
• Customer Interest
  • A/T Controls - DTC's P0711, P0712, P0713
  • A/T Controls - DTC's P0717, P0721, P0722
  • A/T Controls - MIL ON/DTC's P0705/P0707/P0706/P0708
  • Drivetrain - Popping/Creaking Noise On Acceleration
  • A/T Controls - Bump Felt In Park/DTC P0748
  • A/T - MIL ON/Failsafe Mode/Multiple Solenoid DTC's Set
  • A/T - MIL ON/DTC's P0705/P0707/P0708/No Start In P/N
    • Overview
    • Service Procedure
  • A/T - MIL ON/DTC's Set/Fail Safe Mode/Harsh Engagement
  • A/T - Various Shift Lever Issues
• By Symptom
  • Auto Shifted Manual Transmission
    • A/T - Hyundai Specified ATF And Additive Usage
  • Customer Interest
    • A/T Controls - DTC's P0711, P0712, P0713
    • A/T Controls - DTC's P0717, P0721, P0722
    • A/T Controls - MIL ON/DTC's P0705/P0707/P0706/P0708
    • Drivetrain - Popping/Creaking Noise On Acceleration
    • A/T Controls - Bump Felt In Park/DTC P0748
    • A/T - MIL ON/Failsafe Mode/Multiple Solenoid DTC's Set
    • A/T - MIL ON/DTC's P0705/P0707/P0708/No Start In P/N
      • Overview
      • Service Procedure
    • A/T - MIL ON/DTC's Set/Fail Safe Mode/Harsh Engagement
    • A/T - Various Shift Lever Issues
  • Difficult gear selection
    • A/T - Various Shift Lever Issues
  • Hard Shifting
    • A/T - Delayed/Harsh Shift Diagnostic Information
      • Overview
      • Service Procedure
    • A/T - MIL ON/DTC's Set/Fail Safe Mode/Harsh Engagement
  • Incorrect gear selection
    • A/T - Various Shift Lever Issues
  • No shift/Incorrect gear engagement
    • A/T - MIL ON/Failsafe Mode/Multiple Solenoid DTC's Set
    • A/T - MIL ON/DTC's Set/Fail Safe Mode/Harsh Engagement
  • Noise
    • Drivetrain - Popping/Creaking Noise On Acceleration
  • Recalls
    • Campaign TB8 - A/T Intermediate Shaft Noise
      • Overview
      • Section I: Service Procedure
      • Procedure # 2: Transaxle and/or Intermediate Shaft Worn
      • Procedure # 3. Repair Differential:
  • Stiff controls
    • A/T - Various Shift Lever Issues
• All Technical Service Bulletins
  • A/T Controls - DTC's P0711, P0712, P0713
  • A/T Controls - DTC's P0717, P0721, P0722
  • A/T Controls - MIL ON/DTC's P0705/P0707/P0706/P0708
  • A/T - Oil Cooler Flushing Information
  • A/T Controls - ECM/TCM Reset And Relearn Adaptive Values
  • Drivetrain - Popping/Creaking Noise On Acceleration
  • A/T - Delayed/Harsh Shift Diagnostic Information
    • Overview
    • Service Procedure
  • Automatic Trans. - Stall Test Procedures
  • A/T - Remanufactured Auto. Transmission Program
  • A/T Controls - Bump Felt In Park/DTC P0748
  • Engine, Drivetrain - Gray RTV Sealer Update Information
  • A/T - MIL ON/Failsafe Mode/Multiple Solenoid DTC's Set
  • A/T - MIL ON/DTC's P0705/P0707/P0708/No Start In P/N
    • Overview
    • Service Procedure
  • A/T - MIL ON/DTC's Set/Fail Safe Mode/Harsh Engagement
  • A/T Controls - Resetting PCM/TCM Adaptive Values
  • Campaign TB8 - A/T Intermediate Shaft Noise
    • Overview
    • Section I: Service Procedure
    • Procedure # 2: Transaxle and/or Intermediate Shaft Worn
    • Procedure # 3. Repair Differential:
  • A/T - Hyundai Specified ATF And Additive Usage
  • A/T - Various Shift Lever Issues
  • A/T - Stall Test Procedure
  • A/T (6 Speed) - ATF Fluid Level Checking Procedure