Shifter A/T: Adjustments

Adjustment

Adjusting method for T/M control cable
1. Set room side lever and T/M side lever to "N" position.
2. Connect room side lever and shift cable.
3. Connect T/M side lever to cable in a following orders.
(1) Push cable (A) lightly to "F" direction shown to eliminate FREE PLAY of cable after mounting the nut (B) lightly.




(2) Tighten adjusting nut (B).

Tightening torque:
7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)


4. After adjusting according to (2)-(4). Check to be sure that this part operates surely at each range of T/M side corresponding to each position of room lever.