Procedures

Service Adjustment Procedure

Transmission Oil Inspection And Replacement

1. After parking the vehicle on a plain, stop the engine.
2. After removing the oil filler plug and washer, inspect the manual transaxle fluid condition and quantity.
3. If the manual transaxle fluid is contaminated, drain it out by removing the oil drain plug.
4. Tighten the new oil drain plug and feed manual transaxle fluid to a proper level.

Tightening torque :
29.4 - 34.4Nm(3.0 - 3.5Kgf.m, 21.7 - 25.3lb-ft)
Oil type: SAE75W/85
Oil quantity:
1.9 liter(2.0077 US qt, 1.6718 lmp qt)

5. Retighten the oil filler plug with a new washer.

Tightening torque :
29.4 - 34.4Nm(3.0 - 3.5Kgf.m, 21.7 - 25.3lb-ft)