ICM (Integrated Circuit Module) Relay Box

Inspection

Hazard Lamp
Check for continuity between the terminals.
1. There should be continuity between the No.12 and No.13 terminals when power and ground are connected to the No.13 and No.3 in the M91-2 terminals.
2. There should be no continuity between the No12 and No.13 terminals when power is disconnected.

Burglar Alarm Horn
Check for continuity between the terminals.
1. There should be continuity between the No.8 and No.9 terminals when power and ground are connected to the No.1 and No.8 in the M91-2 terminals.
2. There should be no continuity between the No.8 and No.9 terminals when power is disconnected.

Burglar Alarm
Check for continuity between the terminals.
1. There should be no continuity between the No.11 and No.10 terminals when power and ground are connected to the No.11 and No.4 in the M91-2 terminals.
2. There should be continuity between the No.11 and No.10 terminals when power is disconnected.

Adjust Pedal
Check for continuity between the terminals.
1. There should be continuity between the No.15 and No.5 terminals when power and ground are connected to the No.15 and No.2 in the M91-2 terminals.
2. There should be no continuity between the No.15 and No.5 terminals when power is disconnected.

Driver Door Two Turn Unlock
Check for continuity between the terminals.
1. There should be continuity between the No.7 and No.4 terminals when power and ground are connected to the No.6 and No.4 in the M91-1 terminals.
2. There should be continuity between the No.7 and No.5 terminals when power and ground are disconnected.