Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2011 >> Elantra Touring L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Service and Repair





Removal

1. Remove the battery terminal.
2. Lift the vehicle.
3. Remove the under cover.
4. Loosen the drain plug and drain the transaxle oil.
5. Remove the oil pan.
6. Remove the oil filter.
7. Remove the valve body.
8. Disconnect the main harness connector (A) from the valve body.






Installation

1. Connect the main harness connector (A) to the valve body.

CAUTION:
When connecting the oil temperature connector, check the connector for rust, dirt, or oil, then reconnect it.




2. Install the valve body.

Tightening torque :
10 - 12Nm(1.0 - 1.2kgf.m, 7 - 8lb-ft)

3. Install the oil filter.

Tightening torque :
5 - 7Nm(0.5 - 0.7kgf.m, 4 - 5lb-ft)

4. Continue to apply liquid gasket at application points at the oil pan with Ø0.098in(2.5mm) thickness.

Liquid gasket Part name :Three bond 1281B




5. Tighten the mounting bolt with the specified TORQUE after installing the oil pan.

Tightening torque :
10 - 12Nm(1.0 - 1.2kgf.m, 7 - 8lb-ft)

6. Install the drain plug.

Tightening torque :
40 - 50Nm(4.0 - 5.0kgf.m, 28.9 - 36.2lb-ft)

7. Installation is the reverse of the removal.
pro multis · About Operation CHARM