Front Seat

Replacement

Seat Assembly Replacement

Driver's
1. Remove the seat belt lower anchor cover (A).




2. After loosening the seat belt lower anchor mounting bolt, remove the seat belt lower anchor (A).




3. Remove the seat assembly mounting cover.
4. After loosening the seat assembly mounting bolts, remove the seat assembly (A).




5. Disconnect the connectors (A), and remove the seat assembly.




6. Installation is the reverse of removal.

Passenger's
1. Remove the seat belt lower anchor cover (A)




2. After loosening the seat belt lower anchor mounting bolt, remove the seat belt lower anchor (A).
3. Disconnect connector (B).




4. Disconnect the connectors (A), and remove the seat assembly.




5. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-scan (PRO) after replacing parts (Passenger's)


Recliner Cover Replacement
1. Remove the lever (A) and (B).




2. Remove the cover (A).




3. After loosening the mounting screws, remove the recliner cover (A).




4. Disconnect the connector (A).




5. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-scan (PRO) after replacing parts (Passenger's)


Seat Back Cover Replacement
1. Remove front seat assembly.
2. Remove the headrest.
3. After disconnecting the scuff band (A), remove the seat back panel (B).




4. Disconnect the protector (A) from the back frame.




5. Disconnect the connector (A).




6. Pull out the headrest guides (A) while pinching the end of the guides, and remove them.




7. After removing the hog-ring clips on the front of seat cushion and remove the seat cushion cover (A).




8. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-scan (PRO) after replacing parts (Passenger's)


Seat Cushion Cover Replacement
1. Remove front seat assembly.
2. Remove the recliner cover.
3. After disconnect the protector (A), remove the seat cushion (B).




4. After removing the hog-ring clips on the front of seat cushion and remove the seat cushion cover (A).




5. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-scan (PRO) after replacing parts (Passenger's)


Seat Frame Replacement
1. Remove the following items:
A. Recliner cover
B. Seat back panel
C. Headrest guide
D. Seat back cover
2. After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).

NOTE:
- Remove the side air bag for replacing side air bag installation seat.
- Before service, be fully aware of precautions and service procedure relevant to air bag




3. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-scan (PRO) after replacing parts (Passenger's)