Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Input Speed Sensor
Inspection
Check that the resistance between the 2 pins of the sensor is within the standard value.
Standard value
Resistance (at 20°C) : 560 - 680 Ohms
Replacement
1. Remove the bolt to remove the input speed sensor from the ATM.
2. Install the input speed sensor with the bolt to the ATM.
Tightening torque :
4 - 7 Nm(0.4 - 0.7 kgf.m, 2.89 - 5.06 lb-ft)
Bolt size(3) :M6x1.0x14mm