Output Speed Sensor

Inspection

Check that the resistance between the 2 pins of the sensor is within the standard value.

Standard value
Resistance (at 20°C) : 560 - 680 Ohms

Replacement

1. Remove the bolt to remove the input speed sensor from the ATM.








2. Install the input speed sensor with the bolt to the ATM.

Tightening torque :
4 - 7 Nm(0.4 - 0.7 kgf.m, 2.89 - 5.06 lb-ft)

Bolt size(3) :M6x1.0x14mm