Component Inspection

Power Seat Module

B1955 Recline Motor Or Sensor Error - Component Inspection

Component Inspection

Recline Motor Check
1. Connect scantool
2. IG "ON" & ENG "OFF"
3. Select "Actuation Test" mode.
4. Execute "Seat Recline Motor (UP, DOWN)" test.

Specification : Turned to pressed direction




5. Is motor working normal?





Check switch
1. IG "ON" & ENG "OFF"
2. After connect GDS, select "Current Date" menu.
3. Check whether "Recline Switch" is turned to "ON" when the control switch is pressed. (Forward, Backward)

Specification : Service data is switched. (ON <-> OFF)




4. Is the service data normal?