W/Harness Inspection

Steering Column Module

B1960 Tele Position Sensor Error - W/Harness Inspection

Terminal and Connector Inspection

1. Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.
2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
3. Has a problem been found?






Signal Circuit Inspection

1. IG "ON" & ENG "OFF".
2. Measure the signal voltage of "Telescopic Motor Position Sensor" with pressing the telescope switch.

Specification : Approx. 1 - 4 V during motor working




3. Is the signal output normal?