Antenna - Keyless Entry: Service and Repair

Removal

Interior 1 Antenna
1. Disconnect the negative(-) battery terminal.
2. Remove the main crash pad.
3. Remove the interior 1 antenna (A) after disconnecting the connector and loosening the mounting nuts (2EA).





Interior 2 Antenna
1. Disconnect the negative(-) battery terminal.
2. Remove the center console.
3. Remove the interior 1 antenna (A) after loosening the mounting nuts (2EA).





Trunk Antenna
1. Disconnect the negative(-) battery terminal.
2. Remove the trunk transverse trim.
3. Disconnect the trunk antenna connector (A) and remove the trunk antenna (B) after loosening screws (2EA).





Exterior Bumper Antenna
1. Disconnect the negative(-) battery terminal.
2. Remove the rear bumper.
3. Disconnect the exterior bumper antenna connector on rear bumper center part.
4. Disconnect the antenna connector and remove the exterior bumper antenna (A) after loosening the screws (2EA).






Installation

Interior 1 Antenna
1. Install the interior 1 antenna.
2. Install the main crash pad.
3. Install the negative (-) battery terminal and check the smart key system.

Interior 2 Antenna
1. Install the interior 2 antenna.
2. Install the center console.
3. Install the negative (-) battery terminal and check the smart key system.

Trunk Antenna
1. Install the trunk antenna.
2. Install the trunk transverse trim.
3. Install the negative (-) battery terminal and check the smart key system.

Exterior Bumper Antenna
1. Install the exterior bumper antenna.
2. Install the rear bumper.
3. Install the negative (-) battery terminal and check the smart key system.