Repair procedures

Replacement

1. Remove the front door window glass.

2. Remove the front door outside handle.

3. Loosen the mounting bolt (A).




4. After loosening the front door module mounting bolts, then remove the front door module (A).

Tightening torque :
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)




5. Disconnect the connectors and front door module wiring harness (A).




6. Installation is the reverse of removal.

NOTE:
- The area of whole parts should be applied with sufficient grease.
- Make sure connectors are connected properly and each rod is connected securely.
- Make sure the door locks/unlocks and opens/closes properly.