Repair Procedures
Removal
1. Remove the rear wheel and tire.
Tightening torque:
88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)
2. Remove the rear wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 7.6 lb-ft)
3. Remove the rear seat back.
4. Disconnect the rear wheel speed sensor connector.
5. Installation is the reverse of removal.
CAUTION:
Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAAF-1).
When inserting the sensor, take care the O-ring not to be damaged.