Repair Procedures

Removal and Installation

1. Remove the battery.
2. Remove the engine cover.
3. Remove the air duct (A).




4. Remove the air cleaner assembly.
(1) Disconnect barometric pressure sensor (BPS) connector (A)
(2) Disconnect the breather hose (B)
(3) Disconnect the intensifier hose (C)
(4) Loosen the clamp (D) and then disconnect the air intake hose from the throttle body.

Tightening torque :
2.9 - 4.9N.m (0.3 - 0.5kgf.m, 2.2 - 3.6lb-ft)

(5) Remove the air cleaner assembly (E).

Tightening torque :
7.8 - 9.8N.m (0.8 - 1.0kgf.m, 5.8 - 7.2lb-ft)




5. Installation is reverse order of removal.