Rear Assist Arm

Replacement

1. Remove the rear wheel & tire (A).

Tightening torque:
88.3 - 107.9N.m (9.0 - 11.0kgf.m, 65.1 - 79.6lb-ft)





CAUTION:
- Be careful not to damage to the hub bolts when removing the front wheel & tire.

2. Remove the rear shock absorber.

3. Remove the spirit pin and castle nut and then disconnect the rear assist arm (A) from the rear axle.

Tightening torque:
78.5 - 88.3N.m(8.0 - 9.0Kgf.m, 57.9 - 65.1lb-ft)




4. Loosen the bolt & nut and then remove the rear assist arm (A) with the sub frame.

Tightening torque:
107.9 - 117.7N.m(11.0 - 12.0Kgf.m, 79.6 - 86.8lb-ft)




5. Installation is the reverse of removal.
6. Check the alignment.


Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear assist arm for deformation.
3. Check ball joint for damage.
4. Check for the all bolts and nuts.