Windshield Deicer Switch

Inspection

1. The windshield deicer switch inputs can be checked using the GDS.
2. To check the input value of windshield deicer switch, select option "IPM".
3. Select option "Current Data".




4. To check the input value of windshield deicer switch in force mode, select option.






Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the center fascia panel.




3. Remove the heater control unit (A) after removing screws.






Installation

1. Install the heater control unit.
2. Install the center fascia panel.